Najczęściej zadawane pytania - Electronic Materials / Software

Version 3 had a few bugs (i.e., incorrect implementation of the on/off-gassing models) that were fixed in the release of version 4. The majority of these fixes will in some cases result in differences of around 1-1.5% of the dive time. However, one of the corrections can alter the result a bit more. This applies to the rate of helium off-gassing during a surface interval. If you plan repetitive dives with helium, any decompression plan following the surface interval will likely be shorter in version 4 compared to version 3. With this in mind, if you are used to planning repetitive dives in version 3, you would need to increase the conservatism for the repetitive dive in version 4 to achieve the same level of gas loading that you are used to.

Yes, repetitive dives are now supported through the "Logbook" section, which you will find in the main menu.
To plan a repetitive dive, tap the large + sign to plan your first dive. Then return to the Logbook page, where you will see an entry for the current day with the first dive listed under this day. To plan a second ("repetitive") dive, tap the smaller + sign on the day entry. This will open up a new planning page, where you will now find a "Surface Time" tab to the left of the active "Levels" tab. Enter your surface interval here, and then plan your repetitive dive as usual in the "Levels" tab.